Commercial | Windows | Doors | Hurricane Products | Hardware
Commercial Division
Our Commercial Division is experienced with automatic and manual doors, commercial windows and storefronts.
We do not outsource our installations & service.
Our commercial products are manufactured by the top names in the industry. Choose from the selection below.
U.S. Aluminum Storefront
SPECIFICATIONS
| MANUFACTURER | CRL-US Aluminum |
| FL WIND RATING(s) |
|
| FRAMING MATERIAL(s) |
|
| AVAIL. STYLE(s) |
|
Product Information
08 4100 Entrances and Storefronts
Series 400 & 450 Center Glaze Storefronts | ArcticFront™ Series 45X |
Series 451 & IT451 Center Glaze Storefronts | Flush Front™ Storefront
1/4″ or 3/8″ (6 or 10 mm) Glazing Infills
- Series 400 – 1-3/4″ x 4″ (44.5 x 101.6 mm)
- Series 450 – 1-3/4″ x 4-1/2″ (44.5 x 114.3 mm)
- Injection Molded Water Deflectors
- Interior or Exterior Glazed
- Screw Spline or Shear Block Assembly
Series 45X Dual Thermal Storefront System
1″ (25 mm) Glazing Infills
- Dual Polyurethane Thermal Breaks
- 2″ x 4-1/2″ (50.8 x 114.3 mm) Thermal Frame
- U-Factors as Low as 0.19
- Screw Spline or Shear Block Assembly
The ArcticFront™ Series 45X High Performance Storefront System offers optimal thermal performance with the installer-friendly features of a traditional storefront. The NFRC-rated ArcticFront™ Series 45X Storefront can produce U-factors ranging from 0.37 using 1″ low-E insulating glass, to as low as 0.19 using specially configured insulated glass units. The Series 45X utilizes the new ArcticFront™ Series 375-T High Performance Medium Stile Thermal Doors and is compatible with all U.S. Aluminum Windows.
Series IT451 offers improved thermal performance using the Poly-Aluminizer™ and Lancer™ Thermal Break Technology. Series 451 and IT451 may be interior or exterior glazed. A top load E.P.D.M. gasket is used to position and weatherseal the glass in the aluminum pocket. Center Glazed Systems are compatible with all U.S. Aluminum Entrance Doors.
08 4113 CRL-U.S. Aluminum Flush Front™ Storefront Systems
Flush In, Flush Out, or Combination Glazing
- Exterior or Interior Glazed
- Ground Floor to Mid-Rise
- Factory Pre-Punched Weep Slots
- Series 451 – 2″ x 4-1/2″ (50.8 x 114.3 mm) Non-Thermal
- Series IT451 – 2″ x 4-1/2″ (50.8 x 114.3 mm) Thermal
- Screw Spline or Shear Block Assembly
- Stacking Installation Option
Flush Front™ Systems feature screw race joinery and panel type installation, which allows for shop or job site fabrication. Injection molded water deflectors at intermediate horizontals, and a continuous sill gutter with factory pre-punched weep slots, ensure control of any infiltrated water. The plane of the glass may be reversed from exterior to interior or any combination to give these standard systems a custom look. Flush Front™ is ideal for use in storefront and punched opening or ribbon window applications. Series FT Systems offer improved thermal performance using the Poly-Aluminizer™ and Lancer™ Thermal Break Technology.
08 4113 CRL-U.S. Aluminum Series IG500 & IG600 Hurricane Resistant Storefronts
9/16″ (14 mm) Glazing (Series IG500) 1-5/16″ (33 mm) Glazing (Series IG600)
- 2-1/2″ x 5″ (63 x 127 mm) Framing
- Large Missile Impact Tested
- Structurally Tested to 210 mph
- Integral Secondary Water Control
The Storm Front™ System is a dry glazed system that saves both time and money at installation. The IG500 and IG600 Storm Front™ Systems have passed the stringent requirements of the Miami/Dade County protocol for maximum protection from high winds and wind borne debris. The Storm Front™ Entrance incorporates a patented one glazing bead design, ensuring maximum protection at the entrance area.
08 4113 CRL-U.S. Aluminum Series IT600 Thermal Hurricane Resistant Storefront
1-5/16″ (33 mm) Impact Resistant Glass
- 2-1/2″ x 5″ (63 x 127 mm) System
- Thermally Insulated
- Tested in Compliance With Dade County Protocols
- Uses Standard Storm Front™ Entrance
The IT600 Storm Front™ System features a 2-1/2″ x 5″ (63 x 127 mm) profile, a high performance subsill, and is designed to be glazed with 1-5/16″ (33 mm) impact resistant insulating glass. Screw spline assembly allows units to be shop fabricated for quicker, easier field installation. The IT600 Entrance incorporates a patented one glazing bead design, ensuring maximum protection at the entrance area. Standard corner construction includes heavy-duty blocks and welding for secure door corners.
08 4113 CRL-U.S. Aluminum Defender Series BT601 Blast Resistant Thermal Storefront
1-5/16″ (33 mm) Impact Resistant Glass